JS500 forced concrete mixer detailed introduction and concrete batching plant matching

JS500 forced concrete mixer, also called js500 mixer, is a series of small concrete mixer products. The mechanical equipment is a complete set of automatic concrete production equipment composed of seasoning, mixing, motor control, etc., which can mix dry forced, plastic deformation, fluidity, light aggregate and other concrete and various cement mortars. Each tank can mix 500 liters of concrete, can produce 20-25 cubic meters of concrete per hour, and the basic production efficiency is 25m3/h.

JS500 concrete mixer is composed of mixing blades, mixing motor, lifting motor, centrifugal pump motor and other components. And it can be updated and transformed according to the special requirements of customers to meet the needs of users.

KAMO MACHINERY has made significant progress in the shaft end seal, and took the lead in developing a new type of main shaft bearing seal. This technology effectively protects the bearing housing and increases the service life of the mixer. JS500 forced mixer is a high-efficiency, widely used and suitable for various prefabricated component factories, roads, water conservancy projects, highways and bridges, ports and other engineering buildings.

Small and medium-sized concrete mixers are the best-selling equipment. How can customers extend the life of the equipment when using them? Tell you in a minute!

1. Maintenance. To extend the life of your equipment, learning how to maintain it is essential. The stirring shaft is the core of the mixer, and each one must be filled with oil. The degree of oil filling is only when you can see butter leaking out of the mixer;

2. The parts that need to be replaced should be replaced in time, and the problems should be repaired and replaced in time;

3. After each use, the mixer must be cleaned in time, the mixing shaft and the residual materials in the mixer must be cleaned, and the fixation of the discharge door bearing, cylinder, etc. must be checked in time.

Speaking of which, the cleaning of the concrete mixer is also very important. What do you need to pay attention to?

First of all, if you want to remove the concrete accumulated in the concrete mixer, you can choose to remove it with a chisel instead of hitting it with a sledgehammer;

Secondly, remember to cut off the power supply when cleaning. After the mixer stops working, pour water and stones into the mixing drum for cleaning. It takes about 15 minutes to clean, and then drain the water and stones.

Finally, cleaning should be done on a regular basis, with regular care and maintenance such as lubricating and refueling.

500 concrete batching plant equipment is mainly composed of concrete mixer, batching machine, cement silo, screw conveyor, metering system, concrete admixture metering system and microcomputer main control room. It can be divided into three control modes: automatic, semi-automatic and manual. It has the advantages of uniform mixing, stable performance, modular structure, high production efficiency, and accurate weighing.

The equipment of the 500 concrete batching plant is different, and the price is also different. For example, the relative heights of the feet are 1.5 meters, 2 meters, 2.7 meters, and 3.8 meters. The feeding method can also be divided into manual and hydraulic opening. These configurations directly affect the price of the mixing plant.

The above is the detailed introduction of the JS500 forced concrete mixer and the matching of the mixing station. If you are not very clear about what aspects, you can contact me, give you a detailed explanation, and send information for review.